Emphatic Vans & Testing Labs Private Limited

Additional Information:

• Item Code: IS-2052
• Delivery Time: 35-45 Days

Scheme Of Inspection and Testing

 1. LABORATORY - A laboratory shall be maintained which shall be suitably equipped and staffed, where different tests given in the specification shall be carried out in accordance with the methods given in the specification. 1.1 The manufacturer shall prepare a calibration plan for the test equipment.

2. TEST RECORDS – The manufacturer shall maintain test records for the tests carried out to establish conformity.

3. LABELLING AND MARKING – The labelling and marking on each and every product as per the BIS guidelines should be permanently affixed, resistant to remove, scratching and should not be easily washed off.

The manufacturer of Stationary Storage Type Electric Water Heaters must declare their ratings in wattage, input voltage, type, insulation class, and degree of protection with a model number. For license grants or changes in scope, each model must be tested, with exceptions for higher insulation class models and models with specific degrees of protection. Factory test reports of other models are also required. The scope of the license may be restricted based on the manufacturer's manufacturing capability and testing facilities.

Scheme Of Inspection and Testing

 1. LABORATORY - A laboratory shall be maintained which shall be suitably equipped and staffed, where different tests given in the specification shall be carried out in accordance with the methods given in the specification. 1.1 The manufacturer shall prepare a calibration plan for the test equipment.

2. TEST RECORDS – The manufacturer shall maintain test records for the tests carried out to establish conformity.

3. LABELLING AND MARKING – The labelling and marking on each and every product as per the BIS guidelines should be permanently affixed, resistant to remove, scratching and should not be easily washed off.

Asbestos Cement Flat Sheets are classified as semi-compressed, fully-compressed, and have minimum bending strength, loading parallel to the fiber, or at right angles. They have dimensions of 3, 4, 5, 6, 8, 10, 12, 15, and 600, 1200, 1800, 2400, 3000, 610, 1220, 1830, 2440, and 3050. Manufacturing higher thickness sheets is more critical. Grouping guidelines for GoL/CSoL include testing one sample with maximum thickness from each class, declaring varieties, and ensuring rotational testing during operation.

Additional Information:

• Item Code: IS-16240
• Delivery Time: 35-45 Days

Additional Information:

• Item Code: IS-1664
• Delivery Time: 35-45 Days

Additional Information:

• Item Code: IS-2508
• Delivery Time: 35-45 Days

Additional Information:

• Item Code: IS-2553-Part-1
• Delivery Time: 35-45 Days

Additional Information:

• Item Code: IS-2553-PART-2
• Delivery Time: 35-45 Days

Scheme Of Inspection and Testing

 1. LABORATORY - A laboratory shall be maintained which shall be suitably equipped and staffed, where different tests given in the specification shall be carried out in accordance with the methods given in the specification. 1.1 The manufacturer shall prepare a calibration plan for the test equipment.

2. TEST RECORDS – The manufacturer shall maintain test records for the tests carried out to establish conformity.

3. LABELLING AND MARKING – The labelling and marking on each and every product as per the BIS guidelines should be permanently affixed, resistant to remove, scratching and should not be easily washed off.

                                                                Grouping Guidelines

The guidelines for certifying Unitary Air Conditioners as per IS 1391 (Part 1): 2023 include classifications based on function (cooling only) and cooling and heating. Air Conditioners can be grouped into two groups based on cooling capacity: I up to and including 4 400 and I above 4 400. Samples from each group must be tested for all requirements. The manufacturer must declare all model numbers and technical parameters at the time of grant or change in scope of license. The scope of license may be restricted based on the manufacturer's manufacturing and testing capabilities. A typical example for drawing samples to cover the entire range under the license is provided. If a new model is intended to be covered within the existing scope, the manufacturer must declare the parameters to BIS for records. If discrepancies are observed post-facto, the head of BIS Branch Office may direct the licensee to cease marking or issue directions for product recall.

Scheme Of Inspection and Testing

 1. LABORATORY - A laboratory shall be maintained which shall be suitably equipped and staffed, where different tests given in the specification shall be carried out in accordance with the methods given in the specification. 1.1 The manufacturer shall prepare a calibration plan for the test equipment.

2. TEST RECORDS – The manufacturer shall maintain test records for the tests carried out to establish conformity.

3. LABELLING AND MARKING – The labelling and marking on each and every product as per the BIS guidelines should be permanently affixed, resistant to remove, scratching and should not be easily washed off.

                                                                Grouping Guidelines

IS 2266: 2019 categorizes Steel Wire Ropes for General Engineering Purposes into various varieties based on construction, type, rope grade, core type, size, and galvanized/ungalvanized (bright) options. The fiber core can be Natural Fibre (CFN) or Manmade Synthetic Fibre (CFS), Soft Fibre (Jute) or Hard Fibre (Sisal or Manila), or any suitable alternative material. The steel core can be Core Wire Strand (CWS) or Independent Wire rope Core (CWR). The grouping guidelines for GoL/CSoL include testing samples for all constructions, each type, highest size, and separate samples for fiber and steel core. The license scope may be restricted based on the manufacturer's manufacturing and testing capabilities. During license operation, all varieties must be tested in rotation.:

Scheme Of Inspection and Testing

 1. LABORATORY - A laboratory shall be maintained which shall be suitably equipped and staffed, where different tests given in the specification shall be carried out in accordance with the methods given in the specification. 1.1 The manufacturer shall prepare a calibration plan for the test equipment.

2. TEST RECORDS – The manufacturer shall maintain test records for the tests carried out to establish conformity.

3. LABELLING AND MARKING – The labelling and marking on each and every product as per the BIS guidelines should be permanently affixed, resistant to remove, scratching and should not be easily washed off.

                                                                Grouping Guidelines

The Wooden Flush Door Shutters (WFDH) are classified based on grade, type, construction, and sizes. Modular sizes include 8 DS 20/ 8 DS 21/ 9 DS 20/ 9 DS 21/ 10 DS 20/, while non-modular sizes may be permitted with an agreed-upon thickness. Shutters must have a nominal thickness of 25mm, 30mm, and 35mm. Group Flush Door Designation is I 8 DS 20/8 DS 21. For modular sizes, the highest size designation from each group must be tested for all requirements. For non-modular sizes, the highest height of shutters must be tested for all requirements. If the manufacturer opts for the ECO mark, the shutters must be manufactured from wood from sources other than natural forests. The Firm must declare the varieties of shutters they intend to cover in the License, and the scope of the License may be restricted based on the Manufacturer's manufacturing and testing capabilities.:

Scheme Of Inspection and Testing

 1. LABORATORY - A laboratory shall be maintained which shall be suitably equipped and staffed, where different tests given in the specification shall be carried out in accordance with the methods given in the specification. 1.1 The manufacturer shall prepare a calibration plan for the test equipment.

2. TEST RECORDS – The manufacturer shall maintain test records for the tests carried out to establish conformity.

3. LABELLING AND MARKING – The labelling and marking on each and every product as per the BIS guidelines should be permanently affixed, resistant to remove, scratching and should not be easily washed off.

                                                                Grouping Guidelines The GoL/CSoL process considers various aspects of switches, including current, voltage, possible connections, Amperes rating, contact opening, protection against solid foreign objects, water, method of activation, mounting, type of terminals, and protection against electric shock. Switches must be tested for a range of current ratings, and relaxations may be given for specific voltage ratings, patterns, Amperes rating, and protection degree. Each aspect must be tested to cover the entire range, and the license scope is restricted based on available facilities. Samples of each variety must be tested in rotation during operation.

Scheme Of Inspection and Testing

 1. LABORATORY - A laboratory shall be maintained which shall be suitably equipped and staffed, where different tests given in the specification shall be carried out in accordance with the methods given in the specification. 1.1 The manufacturer shall prepare a calibration plan for the test equipment.

2. TEST RECORDS – The manufacturer shall maintain test records for the tests carried out to establish conformity.

3. LABELLING AND MARKING – The labelling and marking on each and every product as per the BIS guidelines should be permanently affixed, resistant to remove, scratching and should not be easily washed off.

                                                                Grouping Guidelines

Each Variety of valve shall be tested for GoL/CSoL

Scheme Of Inspection and Testing

 1. LABORATORY - A laboratory shall be maintained which shall be suitably equipped and staffed, where different tests given in the specification shall be carried out in accordance with the methods given in the specification. 1.1 The manufacturer shall prepare a calibration plan for the test equipment.

2. TEST RECORDS – The manufacturer shall maintain test records for the tests carried out to establish conformity.

3. LABELLING AND MARKING – The labelling and marking on each and every product as per the BIS guidelines should be permanently affixed, resistant to remove, scratching and should not be easily washed off.

                                                                Grouping Guidelines

Valve designs must be tested for license grants or scope changes, with manufacturers informing them. Valve retests are necessary to conform to specifications, and the applicability of tests depends on statutory authority approval.

Scheme Of Inspection and Testing

 1. LABORATORY - A laboratory shall be maintained which shall be suitably equipped and staffed, where different tests given in the specification shall be carried out in accordance with the methods given in the specification. 1.1 The manufacturer shall prepare a calibration plan for the test equipment.

2. TEST RECORDS – The manufacturer shall maintain test records for the tests carried out to establish conformity.

3. LABELLING AND MARKING – The labelling and marking on each and every product as per the BIS guidelines should be permanently affixed, resistant to remove, scratching and should not be easily washed off.

                                                                Grouping Guidelines

Each Variety of Cylinders shall be tested for GoL/CSoL.

Scheme Of Inspection and Testing

 1. LABORATORY - A laboratory shall be maintained which shall be suitably equipped and staffed, where different tests given in the specification shall be carried out in accordance with the methods given in the specification. 1.1 The manufacturer shall prepare a calibration plan for the test equipment.

2. TEST RECORDS – The manufacturer shall maintain test records for the tests carried out to establish conformity.

3. LABELLING AND MARKING – The labelling and marking on each and every product as per the BIS guidelines should be permanently affixed, resistant to remove, scratching and should not be easily washed off.

                                                                Grouping Guidelines

Each Variety of Cylinders shall be tested for GoL/CSoL.

Scheme Of Inspection and Testing

 1. LABORATORY - A laboratory shall be maintained which shall be suitably equipped and staffed, where different tests given in the specification shall be carried out in accordance with the methods given in the specification. 1.1 The manufacturer shall prepare a calibration plan for the test equipment.

2. TEST RECORDS – The manufacturer shall maintain test records for the tests carried out to establish conformity.

3. LABELLING AND MARKING – The labelling and marking on each and every product as per the BIS guidelines should be permanently affixed, resistant to remove, scratching and should not be easily washed off.

                                                                Grouping Guidelines

Each Variety of Cylinders shall be tested for GoL/CSoL.

Scheme Of Inspection and Testing

 1. LABORATORY - A laboratory shall be maintained which shall be suitably equipped and staffed, where different tests given in the specification shall be carried out in accordance with the methods given in the specification. 1.1 The manufacturer shall prepare a calibration plan for the test equipment.

2. TEST RECORDS – The manufacturer shall maintain test records for the tests carried out to establish conformity.

3. LABELLING AND MARKING – The labelling and marking on each and every product as per the BIS guidelines should be permanently affixed, resistant to remove, scratching and should not be easily washed off.

                                                                Grouping Guidelines

The grouping of AC motor capacitors for GoL/CSoL is based on parameters such as rated capacitance, voltage, frequency, climatic category, kind of operation (continuous/intermittent/starting), class of operation (A/B/C/D), and self-healing or non-self-healing. Capacitors with different rated capacitances are considered as one group, with the highest and lowest rated outputs covered. Capacitors with a wider climatic category are covered, while those with lower minimum permissible operating temperature can be included without further testing. The scope of the license may be restricted based on the manufacturer's manufacturing and testing capabilities.