Emphatic Vans & Testing Labs Private Limited

Scheme Of Inspection and Testing

 1. LABORATORY - A laboratory shall be maintained which shall be suitably equipped and staffed, where different tests given in the specification shall be carried out in accordance with the methods given in the specification. 1.1 The manufacturer shall prepare a calibration plan for the test equipment.

2. TEST RECORDS – The manufacturer shall maintain test records for the tests carried out to establish conformity.

3. LABELLING AND MARKING – The labelling and marking on each and every product as per the BIS guidelines should be permanently affixed, resistant to remove, scratching and should not be easily washed off.

                                                                Grouping Guidelines

IS 17400 classifies Glass Fibre Reinforced Gypsum Panels into Class 1 or Class 2. Guidelines for GoL/CSoL include testing each Class for requirements, limiting scope based on manufacturer's capabilities, and ensuring rotational testing for all varieties.:

Scheme of Inspection and Testing

 1. LABORATORY - A laboratory shall be maintained which shall be suitably equipped (as per the requirement given in column 2 of Table 1) and staffed, where different tests given in the specification shall be carried out in accordance with the methods given in the specification. 1.1 The manufacturer shall prepare a calibration plan for the test equipment.

2. TEST RECORDS – The manufacturer shall maintain test records for the tests carried out to establish conformity.

3. LABELLING AND MARKING – The labelling and marking on each and every product as per the BIS guidelines should be permanently affixed, resistant to remove, scratching and should not be easily washed of

1. For the purpose of certification, following technical parameters are considered for classifications of “Evaporative Air Coolers (Desert Coolers)” into different varieties as per IS 3315: 2019:

 Sl. No. Technical parameters Classification based on the technical parameters a) Material of body · Galvanized steel sheet · Plastic b) Minimum Air Capacity at zero static pressure Air Capacity at zero static pressure, in m3/h c) Normal total current and Rated Voltage d) Power input, in W Power input, in W e) Sump Tank capacity, in litres Sump Tank capacity, in litres f) Cooling efficiency of the unit 2. A variety may be defined as group of models having the same value of these technical parameters as above.

Scheme Of Inspection and Testing

 1. LABORATORY - A laboratory shall be maintained which shall be suitably equipped and staffed, where different tests given in the specification shall be carried out in accordance with the methods given in the specification. 1.1 The manufacturer shall prepare a calibration plan for the test equipment.

2. TEST RECORDS – The manufacturer shall maintain test records for the tests carried out to establish conformity.

3. LABELLING AND MARKING – The labelling and marking on each and every product as per the BIS guidelines should be permanently affixed, resistant to remove, scratching and should not be easily washed off.

Safe Deposit Locker Cabinets as per IS 5244: 2020 are classified into Type 1, 2, 2, 3, 4, and other sizes and configurations. The cabinet's outer dimensions are 2000 mm high x 1100 mm wide x 575 mm deep. Performance tests against burglarious attacks are common for all cabinets. A group has been formed for GoL/CSoL, with samples tested for all types. Manufacturers must declare various cabinet types, size, and configurations, as well as critical quality parameters for components. All varieties covered in the license are tested in rotation.

Scheme Of Inspection and Testing

 1. LABORATORY - A laboratory shall be maintained which shall be suitably equipped and staffed, where different tests given in the specification shall be carried out in accordance with the methods given in the specification. 1.1 The manufacturer shall prepare a calibration plan for the test equipment.

2. TEST RECORDS – The manufacturer shall maintain test records for the tests carried out to establish conformity.

3. LABELLING AND MARKING – The labelling and marking on each and every product as per the BIS guidelines should be permanently affixed, resistant to remove, scratching and should not be easily washed off.

Scheme Of Inspection And Testing

 1.LABORATORY - A laboratory shall be maintained which shall be suitably equipped and staffed, where different tests shall be carried out.

2. TEST RECORDS – The manufacturer shall maintain test records for the tests carried out to establish conformity. Test records should be accurate as per  the requirements..

3. LABELLING AND MARKING – The Standard Mark should be marked on each and every product compulsory under the BIS guidelines should be resistant to removal, permanently affixed and should not be easily washed off.

Guidelines:  IS 1855: 2022 covers Stranded Steel Wire Ropes for winding and Man-riding Haulages in Mines which are classified into different varieties based on the following:
a) Construction 
b) Type – Round/ Multi strand rotation resistant/ Flattened strand
c) Rope Grade – 1230/1420/1570/ 1770/ 1960
d) Core – Fibre/ Steel
 Fibre Core shall be made from either manila (abaca) or sisal.
 Steel Core shall be Independent Wire rope Core (CWR) except for multistrand rotation resistant ropes where wire strand cores (CWS) shall be used.
e) Size (Nominal Diameter)
f) Galvanized/ Ungalvanized 

Documents Required:

1.      GSt

2.      MSME

3.      Quality Manager Details

4.      List of Raw Materials with Supplier Name

5.      Test Certificate

6.      In house Test Report

7.      List of Machinery with Capacity

8.      List of Test Equipment

9.    Calibration Certificates

10.  Process Flow Chart

11.  Layout Plan

12.  Authorization Letter

Additional Information:

• Delivery Time: 30- 40 Days

Additional Information:

• Delivery Time: 1 month

An LMPC certificate is an import requirement under the Legal Metrology Act, 2009, and Legal Metrology (Packaged Commodity) Rules, 2011. The Act governs trade in goods that are sold or distributed by weight, measure or number.

Additional Information:

• Delivery Time: 8 working days

Why does a company need a BEE-rating certificate?

• A company needs a BEE-rating certificate to prove their level of BEE status. The certificate includes indicators such as the company’s turnover, the level of black ownership and the overall BEE status.
• The certificate is valid for a year and renewed annually based on evidence submitted for BEE implementation during the period under measurement. The Minister of Finance ruled that from the 7 December 2011 a company cannot conduct business with municipalities, government departments and any state-owned entities without a valid BEE-rating certificate. Failure to submit a valid BEE-rating certificate shall lead to disqualification. Companies can use their BEE-rating certificate to claim procurement spent with BEE compliant suppliers. In order to claim, companies have to buy from BEE compliant suppliers to score points for BEE procurement spent. If you don’t have a BEE-rating certificate, your customers will look for a BEE compliant supplier. It is important for companies to aim to achieve and maintain a level one status to remain competitive.

It sets performance standards for appliances and designs labeling scheme for the same. The star rating of various appliances like AC, Refrigerators, Fans, Pumps, Water Heaters, etc is part of this mandate that they have.

• They develop energy efficiency code for buildings and Industries.
• They certify Energy Managers and Energy Auditors who can perform energy audits.
• They develop norms for energy consumption.

• Create promotional programs for energy efficiency, star-rating and other awareness programs
• Arrange and organize trainings for people who can do energy efficiency projects
• Develop testing and certification procedures and promote testing facilities.
• Promote innovative financing of energy efficiency projects
• Give financial assistance to institutions for promoting efficient use of energy and its conservation
• Prepare educational curriculum on efficient use of energy and its conservation

Additional Information:

• Item Code: IS-4984
• Delivery Time: 35-45 Days

Additional Information:

• Delivery Time: 25 days

• MD 9 is the legal license granted by CDSCO to manufacture Class C or Class D medical devices in India. It is issued after the CDSCO has reviewed and approved the application form. Manufacturers of Class C or Class D medical devices in India must have an MD 9 medical device license in order to legally manufacture, sell, or distribute their products.

Additional Information:

• Delivery Time: 180 days