Emphatic Vans & Testing Labs Private Limited

Additional Information:

• Item Code: -isi-
• Delivery Time: 35-45 Days

Additional Information:

• Item Code: IS-13422
• Delivery Time: 35-45 Days

Scheme Of Inspection and Testing

 1. LABORATORY - A laboratory shall be maintained which shall be suitably equipped and staffed, where different tests given in the specification shall be carried out in accordance with the methods given in the specification. 1.1 The manufacturer shall prepare a calibration plan for the test equipment.

2. TEST RECORDS – The manufacturer shall maintain test records for the tests carried out to establish conformity.

3. LABELLING AND MARKING – The labelling and marking on each and every product as per the BIS guidelines should be permanently affixed, resistant to remove, scratching and should not be easily washed off.

Grouping guidelines : Water Meter of each Type, Size and Dial Type shall be tested to cover that particular variety in the Scope of Licence.

Scheme Of Inspection and Testing

 1. LABORATORY - A laboratory shall be maintained which shall be suitably equipped and staffed, where different tests given in the specification shall be carried out in accordance with the methods given in the specification. 1.1 The manufacturer shall prepare a calibration plan for the test equipment.

2. TEST RECORDS – The manufacturer shall maintain test records for the tests carried out to establish conformity.

3. LABELLING AND MARKING – The labelling and marking on each and every product as per the BIS guidelines should be permanently affixed, resistant to remove, scratching and should not be easily washed off.

                                                                Grouping Guidelines

The product is classified into Class 1, Class 2, Class 3, and Class 4 based on the durability of Organic Coating, with Class 4 being the most stringent due to the duration of salt spray and humidity resistance tests. Manufacturers can specify other durations of Durability Tests, but these are for informational purposes only. The Grouping Guideline for licenses includes testing one sample of each Durability Class of Paint Coating for all requirements, declaring the duration of Durability Tests, and covering Class 0 when a sample conforms. The scope of the license is restricted based on available facilities and samples must be tested in rotation.

Scheme Of Inspection and Testing

 1. LABORATORY - A laboratory shall be maintained which shall be suitably equipped and staffed, where different tests given in the specification shall be carried out in accordance with the methods given in the specification. 1.1 The manufacturer shall prepare a calibration plan for the test equipment.

2. TEST RECORDS – The manufacturer shall maintain test records for the tests carried out to establish conformity.

3. LABELLING AND MARKING – The labelling and marking on each and every product as per the BIS guidelines should be permanently affixed, resistant to remove, scratching and should not be easily washed off.

                                                                Grouping Guidelines

Hot rolled steel strip for welded tubes and pipes according to IS 10748: 2004 is classified on the basis of increasing minimum yield stress and decreasing % elongation as mentioned below: The following guidelines shall be followed for considering grant of licence/inclusion as per IS 10748:2004 : One sample each of any size/mode of de-oxidation of carbon steel strip of Highest and Lowest Yield Stress shall be drawn for testing. On testing of the two samples, grades including and in between those strength limits may be covered in scope of licence. e.g: Alongside one sample of highest grade 6, sample of lowest grade 1 is also to be drawn for covering carbon steel strips of grades 1 to 6. In case of testing for Dimensions (width), tolerance on edge camber and width(cl.13), freedom from defects, telescopicity (if required), coils from which samples are drawn for independent testing, may be tested in the factory. Under such circumstances, samples drawn for independent testing are not required to be tested for above physical parameters. The appropriate undertaking/declaration as per Notes given under Table-1 of IS 10748:2004 may be obtained. In addition, micro-alloying contents as applicable alongside mode of deoxidation may be reflected in the test request for samples drawn for independent testing. While considering grant of licence/inclusion of additional varieties, it shall be ensured that complete manufacturing facilities, testing equipments for all requirements are available with manufacturer.

Scheme Of Inspection and Testing

 1. LABORATORY - A laboratory shall be maintained which shall be suitably equipped and staffed, where different tests given in the specification shall be carried out in accordance with the methods given in the specification. 1.1 The manufacturer shall prepare a calibration plan for the test equipment.

2. TEST RECORDS – The manufacturer shall maintain test records for the tests carried out to establish conformity.

3. LABELLING AND MARKING – The labelling and marking on each and every product as per the BIS guidelines should be permanently affixed, resistant to remove, scratching and should not be easily washed off.

Additional Information:

• Delivery Time: 40-50 DAYS

Scheme Of Inspection and Testing

 1. LABORATORY - A laboratory shall be maintained which shall be suitably equipped and staffed, where different tests given in the specification shall be carried out in accordance with the methods given in the specification. 1.1 The manufacturer shall prepare a calibration plan for the test equipment.

2. TEST RECORDS – The manufacturer shall maintain test records for the tests carried out to establish conformity.

3. LABELLING AND MARKING – The labelling and marking on each and every product as per the BIS guidelines should be permanently affixed, resistant to remove, scratching and should not be easily washed off.

                                                                Grouping Guidelines

1. Ordinary Portland Cement as per IS 269:2015 are classified as follows: Grade: OPC 33, OPC 43, OPC 53, OPC 43S & OPC 53S 2. Considering the above, grouping guidelines as given below shall be followed for GoL/ CSoL: Each grade of Ordinary Portland Cement shall be tested for all requirements to cover that particular grade of cement. 3. When a manufacturer intends to use a performance improver, the manufacturer shall submit the following for approval by BIS: a) Declaration of performance improver intended to use (type & percentage) b) Report of conformity of performance improver through supplier test certificate/inhouse test report; and conformity of cement (produced with intended performance improver) through test report from BIS approved third party laboratory. c) Cement bag design artwork indicating the marking of performance improver Firm shall declare the type and percentage of performance improver(s) being added to manufacture the cement and the same shall be recorded in the factory test record. (see form No 6 & 8 of SIT). 4. The Firm shall declare the varieties of Ordinary Portland Cement they intend to cover in the Licence. The Scope of Licence may be restricted based on the Manufacturing and Testing capabilities of the Manufacturer. 5. During the operation of the Licence, BO shall ensure that all the varieties covered in the Licence are tested in rotation, to the extent possible.

Scheme Of Inspection and Testing

 1. LABORATORY - A laboratory shall be maintained which shall be suitably equipped and staffed, where different tests given in the specification shall be carried out in accordance with the methods given in the specification. 1.1 The manufacturer shall prepare a calibration plan for the test equipment.

2. TEST RECORDS – The manufacturer shall maintain test records for the tests carried out to establish conformity.

3. LABELLING AND MARKING – The labelling and marking on each and every product as per the BIS guidelines should be permanently affixed, resistant to remove, scratching and should not be easily washed off.

                                                                Grouping Guidelines

Polyvinyl Chloride Insulated Unsheathed and Sheathed Cables/Cords with Rigid and Flexible Conductor for rated voltages up to and including 1100 V are classified based on material, number of cores, type of conductor, insulation type, sheath type, and cable category. Firms must declare the varieties and sizes of cables they intend to cover in the Licence, which may be restricted based on manufacturing and testing capabilities. Samples of each variety covered in the scope of the license must be tested in rotation.

Scheme Of Inspection and Testing

 1. LABORATORY - A laboratory shall be maintained which shall be suitably equipped and staffed, where different tests given in the specification shall be carried out in accordance with the methods given in the specification. 1.1 The manufacturer shall prepare a calibration plan for the test equipment.

2. TEST RECORDS – The manufacturer shall maintain test records for the tests carried out to establish conformity.

3. LABELLING AND MARKING – The labelling and marking on each and every product as per the BIS guidelines should be permanently affixed, resistant to remove, scratching and should not be easily washed off.

                                                                Grouping Guidelines

IS 206:2010 classifies Tee and Strap hinges into various types and sizes. Samples must be drawn from each type to cover all tested sizes. Firms must declare the varieties they intend to cover in their license, which may be restricted based on manufacturing and testing capabilities. During license operation, BO must ensure all types and sizes are tested in rotation to the extent possible.

Scheme Of Inspection and Testing

 1. LABORATORY - A laboratory shall be maintained which shall be suitably equipped and staffed, where different tests given in the specification shall be carried out in accordance with the methods given in the specification. 1.1 The manufacturer shall prepare a calibration plan for the test equipment.

2. TEST RECORDS – The manufacturer shall maintain test records for the tests carried out to establish conformity.

3. LABELLING AND MARKING – The labelling and marking on each and every product as per the BIS guidelines should be permanently affixed, resistant to remove, scratching and should not be easily washed off.

                                                                Grouping Guidelines

Not applicable

Scheme Of Inspection and Testing

 1. LABORATORY - A laboratory shall be maintained which shall be suitably equipped and staffed, where different tests given in the specification shall be carried out in accordance with the methods given in the specification. 1.1 The manufacturer shall prepare a calibration plan for the test equipment.

2. TEST RECORDS – The manufacturer shall maintain test records for the tests carried out to establish conformity.

3. LABELLING AND MARKING – The labelling and marking on each and every product as per the BIS guidelines should be permanently affixed, resistant to remove, scratching and should not be easily washed off.

                                                                Grouping Guidelines

The GoL/CSoL of self-ballasted lamps for general lighting services must cover different rating groups, physical configurations, cap types, and color temperatures. Samples must be drawn across groups to cover each rating. If CSoL is required only for cap type, samples must be tested for safety requirements. If CSoL is required only for color temperature, samples must be tested for lumen and color characteristics. The firm must declare the varieties of lamps they intend to cover in the license.

Scheme Of Inspection and Testing

 1. LABORATORY - A laboratory shall be maintained which shall be suitably equipped and staffed, where different tests given in the specification shall be carried out in accordance with the methods given in the specification. 1.1 The manufacturer shall prepare a calibration plan for the test equipment.

2. TEST RECORDS – The manufacturer shall maintain test records for the tests carried out to establish conformity.

3. LABELLING AND MARKING – The labelling and marking on each and every product as per the BIS guidelines should be permanently affixed, resistant to remove, scratching and should not be easily washed off.

                                                                Grouping Guidelines

1. Ordinary Portland Cement as per IS 269:2015 are classified as follows: Grade: OPC 33, OPC 43, OPC 53, OPC 43S & OPC 53S 2. Considering the above, grouping guidelines as given below shall be followed for GoL/ CSoL: Each grade of Ordinary Portland Cement shall be tested for all requirements to cover that particular grade of cement. 3. When a manufacturer intends to use a performance improver, the manufacturer shall submit the following for approval by BIS: a) Declaration of performance improver intended to use (type & percentage) b) Report of conformity of performance improver through supplier test certificate/in-house test report; and conformity of cement (produced with intended performance improver) through test report from BIS approved third party laboratory. c) Cement bag design artwork indicating the marking of performance improver Firm shall declare the type and percentage of performance improver(s) being added to manufacture the cement and the same shall be recorded in the factory test record. (see form No 6 & 8 of SIT). 4. The Firm shall declare the varieties of Ordinary Portland Cement they intend to cover in the Licence. The Scope of Licence may be restricted based on the Manufacturing and Testing capabilities of the Manufacturer. 5. During the operation of the Licence, BO shall ensure that all the varieties covered in the Licence are tested in rotation, to the extent possible.

Scheme Of Inspection and Testing

 1. LABORATORY - A laboratory shall be maintained which shall be suitably equipped and staffed, where different tests given in the specification shall be carried out in accordance with the methods given in the specification. 1.1 The manufacturer shall prepare a calibration plan for the test equipment.

2. TEST RECORDS – The manufacturer shall maintain test records for the tests carried out to establish conformity.

3. LABELLING AND MARKING – The labelling and marking on each and every product as per the BIS guidelines should be permanently affixed, resistant to remove, scratching and should not be easily washed off.

                                                                Grouping Guidelines

Not applicable

Scheme Of Inspection and Testing

 1. LABORATORY - A laboratory shall be maintained which shall be suitably equipped and staffed, where different tests given in the specification shall be carried out in accordance with the methods given in the specification. 1.1 The manufacturer shall prepare a calibration plan for the test equipment.

2. TEST RECORDS – The manufacturer shall maintain test records for the tests carried out to establish conformity.

3. LABELLING AND MARKING – The labelling and marking on each and every product as per the BIS guidelines should be permanently affixed, resistant to remove, scratching and should not be easily washed off.

                                                                Grouping Guidelines

The grouping of non-self-healing Shunt power capacitors for AC systems with a rated voltage up to 1000 V is determined by parameters such as rated output, voltage, frequency, temperature category, phase number, and connection type. Capacitors with different rated outputs are considered as one group, and those with higher outputs are tested for coverage. If capacitors have a wider temperature category, they are covered, and those with lower insulation levels are covered. The Firm must declare the types of capacitors they intend to cover and ensure all varieties are tested in rotation during operation.

Scheme Of Inspection and Testing

 1. LABORATORY - A laboratory shall be maintained which shall be suitably equipped and staffed, where different tests given in the specification shall be carried out in accordance with the methods given in the specification. 1.1 The manufacturer shall prepare a calibration plan for the test equipment.

2. TEST RECORDS – The manufacturer shall maintain test records for the tests carried out to establish conformity.

3. LABELLING AND MARKING – The labelling and marking on each and every product as per the BIS guidelines should be permanently affixed, resistant to remove, scratching and should not be easily washed off.

                                                                Grouping Guidelines

The Indian Standard categorizes Hawai Chappal into kids and adults, with adult categories further divided into Type 1 and Type 2. Footwear can be classified as rubber, polymer, or combination of materials. The strap can be solid or cellular. The requirement for type 2 Adult Hawai Chappal is relaxed. For Grant of Licence (GOL) or Change in Scope of Licence (CSOL), each category and type must be tested. Combinations of materials for bottom and strap must be included in the scope. New varieties of footwear may be added without chemical testing, provided there is no change in the material's type or nature. The scope of license is restricted based on available manufacturing and testing facilities.

Scheme Of Inspection and Testing

 1. LABORATORY - A laboratory shall be maintained which shall be suitably equipped and staffed, where different tests given in the specification shall be carried out in accordance with the methods given in the specification. 1.1 The manufacturer shall prepare a calibration plan for the test equipment.

2. TEST RECORDS – The manufacturer shall maintain test records for the tests carried out to establish conformity.

3. LABELLING AND MARKING – The labelling and marking on each and every product as per the BIS guidelines should be permanently affixed, resistant to remove, scratching and should not be easily washed off.

                                                                Grouping Guidelines

The text outlines the testing requirements for various types of meters, including accuracy class, number of phases and wires, transformer operation, and protective class. Relaxations may be given for certain conditions, such as same basic current and different current ratio. The license covers only 'Insulating Encased Meter of Protective Class II' and CSoL for 'Insulating Encased Meter of Protective Class I'. The firm must declare the varieties of a.c. watthour meters intended to be covered in the license and provide an undertaking regarding construction and design similarity. The scope of the license may be restricted based on the manufacturer's manufacturing and testing capabilities.

Scheme Of Inspection and Testing

 1. LABORATORY - A laboratory shall be maintained which shall be suitably equipped and staffed, where different tests given in the specification shall be carried out in accordance with the methods given in the specification. 1.1 The manufacturer shall prepare a calibration plan for the test equipment.

2. TEST RECORDS – The manufacturer shall maintain test records for the tests carried out to establish conformity.

3. LABELLING AND MARKING – The labelling and marking on each and every product as per the BIS guidelines should be permanently affixed, resistant to remove, scratching and should not be easily washed off.

                                                                Grouping Guidelines

The text outlines the testing requirements for various meters, including accuracy class, number of phases and wires, type of display, and connection through voltage transformer and current transformer only. Relaxations may be given for certain requirements, such as same basic current and different current ratio. If the license covers only electronic register and CSoL for electronic display, samples with electronic display from any variety or new variety will be subjected to all tests. If the license covers only insulating encased meters and CSoL for non-insulating encased meters, samples with non-insulating encased meters will be subjected to all tests. The firm must declare the varieties of AC static transformer operated watthour and var-hour meters intended to be covered in the license and provide an undertaking regarding construction and design similarity. The scope of the license may be restricted based on the manufacturer's manufacturing and testing capabilities.

Scheme Of Inspection and Testing

 1. LABORATORY - A laboratory shall be maintained which shall be suitably equipped and staffed, where different tests given in the specification shall be carried out in accordance with the methods given in the specification. 1.1 The manufacturer shall prepare a calibration plan for the test equipment.

2. TEST RECORDS – The manufacturer shall maintain test records for the tests carried out to establish conformity.

3. LABELLING AND MARKING – The labelling and marking on each and every product as per the BIS guidelines should be permanently affixed, resistant to remove, scratching and should not be easily washed off.

                                                                Grouping Guidelines

IS 302-2-3:2007 covers the safety of electric irons of various types, including dry, cordless, vented, pressurized, and instantaneous types. For GoL/CSoL, samples must be grouped into groups I and II, with one sample from each group tested to cover the entire range. The firm must declare the types of electric irons they intend to cover and ensure all varieties are tested in rotation during operation.