Isi Mark Certification

Scheme Of Inspection and Testing

 1. LABORATORY - A laboratory shall be maintained which shall be suitably equipped and staffed, where different tests given in the specification shall be carried out in accordance with the methods given in the specification. 1.1 The manufacturer shall prepare a calibration plan for the test equipment.

2. TEST RECORDS – The manufacturer shall maintain test records for the tests carried out to establish conformity.

3. LABELLING AND MARKING – The labelling and marking on each and every product as per the BIS guidelines should be permanently affixed, resistant to remove, scratching and should not be easily washed off.

Possible tests in a day 
a) Mass
b) Tensile strength, Warp way & Weft way
c) Tear strength, Warp way & Weft way
d) Air permeability
e) Index puncture resistance

• Minimum Order Quantity: 1 Certificate
• Delivery Time: 40-50 Days

Possible tests in a day
a) Length
b) Width
c) Mass
d) Thickness
e) Tensile strength, Machine direction & Cross direction f) Elongation, Machine direction & Cross direction
g) Colour h) Ash content i) Trapezoid tear strength, Machine and Cross direction 

• Minimum Order Quantity: 1 Certificate
• Delivery Time: 40-50 Days

Grouping Guidelines
1) IS 10773:1995 covers the requirements of solid drawn (seamless) copper tubesinstraight length or coil form for air conditioning and refrigeration purposes. Thisstandard covers 2 grades of Copper Tubes namely Grade 1 and Grade 2.

2) Further, these tubes shall be supplied either in the soft annealed, light annealedor light drawn condition.

3) In view of above, it is proposed to have the following grouping guidelines for thepurpose of GoL/CSoL:- a) Samples ,covering combination of lowest and highest Outside Diameter (OD) andwall thickness of Tubes, from the sizes intended to be covered in the licence, shall be drawnand tested to cover all sizes of Tubes. b) The above samples drawn shall be such which shall cover all conditions (Soft Annealed, Light Annealed, Light Annealed) intended to covered in the licence. c) Separate Samples for each Grade (Grade 1 and Grade 2) are also required to bedrawnand tested

4) However, it shall be ensured that the firm is having all the necessarymanufacturing and testing facilities for manufacturing/testing of all the sizes, gradesand conditions covered in thescope of the licence.

5) During the operation of the licence, BOs shall ensure that all sizes, gradesandconditions covered in the scope of the licence are drawn for independent testinginrotation over a period of time.

• Minimum Order Quantity: 1 Certificate
• Delivery Time: 30-40days

GROUPING GUIDELINES
1. Copper Wire Rods for Electrical Applications according toIS 12444: 2020 is classified on the basis of Type of Wire Rod, Nominal Diameter, ranging from 6 mm to 35 mm.
2. Accordingly, following grouping based on diameter of the product, shall be followed for considering grant of licence/change in licence scope as per IS 12444: 2020
3. One sample of each type from each group of any size for licence/change in scopeof licence(CSoL) may be drawn and has to betested for all the requirements of the specification and applicable to the size tested. If thesample passes, then licence may be granted/inclusion be done for all sizes for Copper Wire Rods for Electrical Applications of the Group, provided that thefirm is having all the necessary manufacturing and testing facilities for the manufacture andtesting of the sizes of Copper Wire Rods for Electrical Applications to be included in the licence.
4. Manufacturing/Testing facilities & capabilities to be verified with respect to sizes andaccordinglysame may be covered in the scope of licence.
5. While considering GOL/CSoL of additional varieties in licence scope, it shall be ensured that theapplicant/licensee has got the complete manufacturing and testing facilities for all the sizesvarieties applied.
6. During the operation of licence, BO shall ensure that all the sizes covered in the licence aredrawn for independent testing on rotation over a period of time.

• Minimum Order Quantity: 1 Certificate
• Delivery Time: 30-40 DAYS

Possible tests in a day
i) Dimensions and Mass as per Cl 6.1
ii) Ends per inch/Picks per inch
iii) Cover Factor
iv) Breaking Strength before UV
v) Bursting Strength
vi) Air Permeability

• Minimum Order Quantity: 1 Certificate
• Delivery Time: 40-50 Days

Sample Size 
01 Vermibed
02 Unlaminated HDPE fabric 1.5 m x 1.5 m,
03 HDPE Tape 20 meter

• Minimum Order Quantity: 1 Certificate
• Delivery Time: 40-50 Days

EVTL India is a trusted service provider that helps manufacturers obtain BIS certification for electric frying pans, deep fat fryers, and similar appliances

Appliances that expose skin to optical radiation, such as certain beauty care devices, are now required to obtain BIS certification under IS 302 (Part 1): 2024. This certification ensures compliance with safety standards, protecting consumers from potential risks associated with optical radiation .