Emphatic Vans & Testing Labs Private Limited
New Delhi, Delhi
GST No. 07AAFCE4483M1Z7
Call 08048973496 90% Response Rate
Send Enquiry
ISI Certification Services Consultant in Delhi
We Emphatic vans & Testing labs pvt ltd are the leading Consultant for all Kind of Certifications such as BIS certification, ISI Certification, EPR Certifications, E-wast Management System & NABL. We have the capacity to produce and do the business of all mangnitude. We have delivered the some major business Pan India.
We are looking enquiries of BIS Certifications & ISI for all required products from Delhi, Gurgaon, Noida, Mumbai, Thane, Ahmedabad, Surat,Vadodara, Indore, Nashik,Rajkot, Kota,Chennai,Coimbtore,Lucknow, Punjab, Kanpur, Ludhiana, Jalandhar, Moga, Chandigarh, Panchkula, Amritsar, Pathankot, Gurdaspur, Khanna, Jammu, Jaipur, Rajesthan, Udaipur, Jodhpur, Ajmer, Ghaziabad, Banaras, Allahabad, Prayagraj, Faizabad, Ayodhya, Agra, Meerut, Haridwar, Saharanpur, Yamunanagar, Dehradun, Rishikesh, Shimla, Hamirpur, Kullu, Manali, Bilaspur, Kashmir, Kathua, Samba, Dalhousi, Chamba, Kangra, Mandi, Paonta Sahib,Uttrakhand, Srinagar, Uttarkashi, Rudraprayag, Pithoragarh, Almora, Nainital, Chamoli, Teri Garhwal, Kolkata, Bhopal, Gwalior, Sagar, Ujjain,Alwar, Kota,Bhilwara, Hanumangarh,Jaisalmer, Pali,Sikar,Sri Ganganagar,Darjeeling,Hoogly,West Bengal, Uttar Pradesh, Himachal Pradesh, Punjab.
# BIS for Toys
# BIS for electronic products
# BIS for PVC pipes
# BIS for Smart watch
# BIS for Steel Wires
# BIS for key Locks
# BIS for V- belts
# BIS for Aircooler
# BIS for Chargers
# BIS for Cements
We are looking enquiries of BIS Certifications & ISI for all required products from Delhi, Gurgaon, Noida, Mumbai, Thane, Ahmedabad, Surat,Vadodara, Indore, Nashik,Rajkot, Kota,Chennai,Coimbtore,Lucknow, Punjab, Kanpur, Ludhiana, Jalandhar, Moga, Chandigarh, Panchkula, Amritsar, Pathankot, Gurdaspur, Khanna, Jammu, Jaipur, Rajesthan, Udaipur, Jodhpur, Ajmer, Ghaziabad, Banaras, Allahabad, Prayagraj, Faizabad, Ayodhya, Agra, Meerut, Haridwar, Saharanpur, Yamunanagar, Dehradun, Rishikesh, Shimla, Hamirpur, Kullu, Manali, Bilaspur, Kashmir, Kathua, Samba, Dalhousi, Chamba, Kangra, Mandi, Paonta Sahib,Uttrakhand, Srinagar, Uttarkashi, Rudraprayag, Pithoragarh, Almora, Nainital, Chamoli, Teri Garhwal, Kolkata, Bhopal, Gwalior, Sagar, Ujjain,Alwar, Kota,Bhilwara, Hanumangarh,Jaisalmer, Pali,Sikar,Sri Ganganagar,Darjeeling,Hoogly,West Bengal, Uttar Pradesh, Himachal Pradesh, Punjab.
# BIS for Toys
# BIS for electronic products
# BIS for PVC pipes
# BIS for Smart watch
# BIS for Steel Wires
# BIS for key Locks
# BIS for V- belts
# BIS for Aircooler
# BIS for Chargers
# BIS for Cements
BIS ISI Certification for Cable Trunking and Ducting Systens Is 14927 (Part 2):2001
Get Best Quote
Rs 49,000 / CertificatePrice on Request
Minimum Order Quantity: 1 Certificate
Product Brochure
Grouping Guidelines
1. The parameters as given below shall be considered for grouping of Cable Trunking and Ducting Systems (CT/DS) for Electrical Installations - intended for mounting on walls or ceilings as per IS 14927 (Part 2):2001 for GoL/CSoL:
i. Material – Metal / Insulating Material / Composite Material
ii. Mechanical Properties (Grade of Mechanical Stress) – Very Light / Light / Medium / Heavy / Very Heavy
iii. Electrical Characteristics – With or without Electrical Continuity/ With or without Electrical Insulating Characteristics
iv. Cover Retention of the System – Access Cover removable without Tools / Access Cover Removable with Tools
2. Considering the above, one sample of CT/DS with highest size from each Material, Grade of Mechanical Stress, Electrical Characteristics and Cover Retention of the System shall be tested to cover all the sizes of that variety tested.
3. However, if CT/DS with Electrical Continuity Characteristics is tested, CT/DS without Electrical Continuity Characteristics may also be covered. Similarly if CT/DS with Electrical Insulating Characteristics is tested, CT/DS without Electrical Insulating characteristics may also be covered.:
1. The parameters as given below shall be considered for grouping of Cable Trunking and Ducting Systems (CT/DS) for Electrical Installations - intended for mounting on walls or ceilings as per IS 14927 (Part 2):2001 for GoL/CSoL:
i. Material – Metal / Insulating Material / Composite Material
ii. Mechanical Properties (Grade of Mechanical Stress) – Very Light / Light / Medium / Heavy / Very Heavy
iii. Electrical Characteristics – With or without Electrical Continuity/ With or without Electrical Insulating Characteristics
iv. Cover Retention of the System – Access Cover removable without Tools / Access Cover Removable with Tools
2. Considering the above, one sample of CT/DS with highest size from each Material, Grade of Mechanical Stress, Electrical Characteristics and Cover Retention of the System shall be tested to cover all the sizes of that variety tested.
3. However, if CT/DS with Electrical Continuity Characteristics is tested, CT/DS without Electrical Continuity Characteristics may also be covered. Similarly if CT/DS with Electrical Insulating Characteristics is tested, CT/DS without Electrical Insulating characteristics may also be covered.:
| BIS / ISI Certification For Cable Trunking & Ducting Systems |
Additional Information:
- Delivery Time: 30-40
View Complete details
Yes! I am Interested
Request a call back
BIS ISI Certification for Glass Beakers Is 2619:2018
Get Best Quote
Rs 39,000 / CertificatePrice on Request
Minimum Order Quantity: 1 Certificate
Product Brochure
Clause 3 covers following 3 types of Beakers: a) Low-form beaker with spout; b) Low-form beaker with spout, thick walled; c) Tall-form beaker with spout; Each type of beaker to be got tested for minimum and maximum capacity specified for that type to cover the entire series (see cl 4) of nominal capacities subject to availability of requisite manufacturing & testing facilities.
Additional Information:
- Delivery Time: 30-40
View Complete details
Yes! I am Interested
Request a call back
BIS ISI Certification for Indented wire for pre-stressed concrete IS 6003:2010
Get Best Quote
Rs 59,000 / CertificatePrice on Request
Minimum Order Quantity: 1 Certificate
Product Brochure
Grouping Guidelines 1. IS 6003 : 2010 covers Indented wire for pre-stressed concrete as details given below: a) Nominal Size – 8.00 , 7.00, 5.00, 4.00, 3.00 and 2.50 mm b) Geometrical characteristics - Elliptical indentation, Round indentation (Also, any other type of indentation as agreed between the manufacturer and purchaser) 2. Considering the above, following grouping guidelines is developed for GoL/CSoL: a) One wire of any nominal size shall be tested to cover all nominal sizes in the scope of the licence. :
| ISI Mark Certification for Indented Wire for Prestressed Concrete |
Additional Information:
- Item Code: IS6003
- Production Capacity: BIS ISI CERTIFICATION
- Delivery Time: 30-50
View Complete details
Yes! I am Interested
Request a call back
BIS ISI Certification for Uncoated stress relieved strand for pre-stressed concrete IS 6006:2014
Get Best Quote
Rs 59,000 / CertificatePrice on Request
Minimum Order Quantity: 1 Certificate
Product Brochure
POSSIBLE TESTS IN A DAY
(i) Wire (Clause 4.1)
(ii) Strand and joints (Clause 4.2 & 4.3)
(iii) Workmanship and finish (Clause 4.5)
(iv) Size and designation (Clause 5)
(v) Breaking strength (Clause 7.1)
(vi) Proof load (Clause 7.2)
(vii) Elongation (Clause 7.3)
(i) Wire (Clause 4.1)
(ii) Strand and joints (Clause 4.2 & 4.3)
(iii) Workmanship and finish (Clause 4.5)
(iv) Size and designation (Clause 5)
(v) Breaking strength (Clause 7.1)
(vi) Proof load (Clause 7.2)
(vii) Elongation (Clause 7.3)
Additional Information:
- Production Capacity: BIS ISI CERTIFICATION
- Delivery Time: 30-50
View Complete details
Yes! I am Interested
Request a call back
BIS ISI Certification for Pp/Hdpe Laminated Woven Sacks Is 17399:2020
Get Best Quote
Rs 49,000 / CertificatePrice on Request
Minimum Order Quantity: 1 Certificate
Product Brochure
QUALITY ASSURANCE PLAN 1.1 It is expected that manufacturers (licensees/applicants) will implement a Quality Assurance Plan i.e. a plan of regular testing and in-process controls, designed to ensure that the product bearing the Standard Mark conforms to all requirements of the Indian Standard. 1.2 The manufacturers shall define a Quality Assurance Plan defining the control unit (i.e. lot/batch etc.) and the levels of control (i.e. the frequency and number of samples for conducting the different tests as per the Indian Standard) and submit the same to BIS Branch Office for information. The manufacturer shall comply with the same and maintain test records in accordance with para 2.4.:
| Mandatory BIS Certification For Textiles (HDPE)/(PP) Woven Sacks for Packaging of 50 kg Cement |
Additional Information:
- Delivery Time: 30-40
View Complete details
Yes! I am Interested
Request a call back
BIS ISI Certification for Water Meter (Domestic Type) Is 779:1994
Get Best Quote
Rs 59,000 / CertificatePrice on Request
Minimum Order Quantity: 1 Certificate
Product Brochure
Grouping Guidelines 1. The parameters as given below shall be considered for grouping of Water Meter (Domestic Type) as per IS 779 : 1994 for GoL/CSoL: a) Class – Class A and Class B b) Jet of Meter – Single Jet / Multi jet c) Type - Semi positive(piston type)/Inferential (turbine type) including magnetic type d) Type of Dial – Wet Dial / Dry Dial type e) Nominal Sizes - 15 mm, 20 mm, 25 mm, 40 mm and 50mm 2. Considering the above, grouping guidelines as given below shall be followed: a) Water Meter having minimum nominal size and maximum nominal size from each Class shall be tested to cover Water Meters of all nominal sizes in that range. b) However, if class B water meter tested, class A water meter may also be covered. c) Water Meter with each Type of jet (single jet/multi jet), Type [Semi positive (piston type)/ Inferential (turbine type) including magnetic type] and Type of Dial (wet/dry dial) shall be tested separately to cover that variety of water meter in the scope of licence.
Additional Information:
- Delivery Time: 30-40
View Complete details
Yes! I am Interested
Request a call back
BIS ISI Certification for Electric Fans (Is 302-Part 2-Sec 80):2017
Get Best Quote
Rs 49,000 / CertificatePrice on Request
Minimum Order Quantity: 1 Certificate
Product Brochure
1. In case a manufacturers is already having a valid licence for ceiling fans as per IS 374 : 2019, then for those varieties which are in the scope of licence, the requirements for IS 302-2-80 : 2017 shall be deemed to be complied. Further, the manufacturer shall not be required to take separate licence as per IS 302-2-80 : 2017 for these varieties. 2. For other types of fans, i.e. Duct fans; Partition fans; Pedestal fans; Table fans; other fans, manufacturer has to get BIS licence as per IS 302-2-80 : 2017.
Types:- Ceiling fans /Duct fans/ Partition fans/ Pedestal fans/ Table Fans/Wall Fans/ Any Others ( to be specified):
Types:- Ceiling fans /Duct fans/ Partition fans/ Pedestal fans/ Table Fans/Wall Fans/ Any Others ( to be specified):
| ISI Certification for Electrical Appliances for Fans |
Additional Information:
- Delivery Time: 30-40
View Complete details
Yes! I am Interested
Request a call back
BIS ISI Certification for Endless V-Belts For Industrial Purpose IS 2494 (Part 2):1993
Get Best Quote
Rs 49,000 / CertificatePrice on Request
Minimum Order Quantity: 1 Certificate
Product Brochure
Grouping Guidelines 1. “Endless V- Belts for Industrial Purposes – Fire Resistant And Antistatic V-Belts” as per IS 2494 (Part 2):1993 are classified based on the following:
Type: Fire resistant anti-static V-Belt/ Anti-static V-Belt
Cross Section: Z, A, B, C, D, E
Pitch Length: As per Table 3A and Table 3B of IS 2494-1 Belts with length other than given in Table 3A and Table 3B may be supplied as agreed to between the purchaser and the supplier. For such belts, the nominal pitch length shall be declared by the manufacturer.
2. For considering GoL/CSoL, Endless V- Belt of lowest and highest pitch length from each Cross Section for each type of V-Belt shall be tested for all requirements to cover the complete range of sizes of the particular cross section and type tested. In addition to the sizes drawn for independent testing as per above guidelines, factory test report of all other sizes intended to be covered in scope shall also be submitted
Type: Fire resistant anti-static V-Belt/ Anti-static V-Belt
Cross Section: Z, A, B, C, D, E
Pitch Length: As per Table 3A and Table 3B of IS 2494-1 Belts with length other than given in Table 3A and Table 3B may be supplied as agreed to between the purchaser and the supplier. For such belts, the nominal pitch length shall be declared by the manufacturer.
2. For considering GoL/CSoL, Endless V- Belt of lowest and highest pitch length from each Cross Section for each type of V-Belt shall be tested for all requirements to cover the complete range of sizes of the particular cross section and type tested. In addition to the sizes drawn for independent testing as per above guidelines, factory test report of all other sizes intended to be covered in scope shall also be submitted
Additional Information:
- Delivery Time: 30-40
View Complete details
Yes! I am Interested
Request a call back
BIS ISI Certification for Boxes and Enclosures for Electrical Installations
Get Best Quote
Rs 49,000 / CertificatePrice on Request
Minimum Order Quantity: 1 Certificate
Product Brochure
Grouping guidelines
1. Following aspects of the product shall be taken into consideration for grouping of different varieties of ‘Boxes and Enclosures for Accessories for household and similar fixed electrical installations’ as per IS 14772: 2020 for GOL/CSoL:
i. Nature of the Material (Insulating/ Metallic/ Composite/ Natural or synthetic rubber or a mixture of both)
ii. Type of installation a. Flush, Semi-flush in Solid Walls, Ceilings or Floors (Not suitable for installation into concrete/ Suitable for installation into concrete with a maximum temperature during the casting Process of +60 °C/ Suitable for installation into concrete with a maximum temperature during the casting process of +90 °C) b. Flush or Semi-flush in Hollow Walls, Hollow Ceilings, Hollow Floors or Furniture (Class Ha / Class Hb) c. Surface Mounting on Walls, Ceilings, Floors or Furniture
iii. Type of inlet (outlet) a. With inlet for Sheathed Cables for Fixed Installations b. With inlet for Flexible Cables c. With inlet for Plain or corrugated Conduits d. With inlet for Threaded Conduits e. With Inlets for Other Types of Conductors/Cables or Conduits f. With Spouts (hub)
1. Following aspects of the product shall be taken into consideration for grouping of different varieties of ‘Boxes and Enclosures for Accessories for household and similar fixed electrical installations’ as per IS 14772: 2020 for GOL/CSoL:
i. Nature of the Material (Insulating/ Metallic/ Composite/ Natural or synthetic rubber or a mixture of both)
ii. Type of installation a. Flush, Semi-flush in Solid Walls, Ceilings or Floors (Not suitable for installation into concrete/ Suitable for installation into concrete with a maximum temperature during the casting Process of +60 °C/ Suitable for installation into concrete with a maximum temperature during the casting process of +90 °C) b. Flush or Semi-flush in Hollow Walls, Hollow Ceilings, Hollow Floors or Furniture (Class Ha / Class Hb) c. Surface Mounting on Walls, Ceilings, Floors or Furniture
iii. Type of inlet (outlet) a. With inlet for Sheathed Cables for Fixed Installations b. With inlet for Flexible Cables c. With inlet for Plain or corrugated Conduits d. With inlet for Threaded Conduits e. With Inlets for Other Types of Conductors/Cables or Conduits f. With Spouts (hub)
Additional Information:
- Delivery Time: 30-40
View Complete details
Yes! I am Interested
Request a call back
BIS ISI Certification for pressure sensitive adhesive insulating Tapes IS 7809 (part 3/sec1)
Get Best Quote
Rs 49,000 / CertificatePrice on Request
Minimum Order Quantity: 1 Certificate
Product Brochure
Grouping Guidelines
1. The following aspects of pressure sensitive adhesive insulating tape shall be taken into consideration for grouping of different varieties of tapes for the purpose of GoL/ CSoL: a. Declared thickness b. Type/ Designation c. Flammability- Flame retardant (FR) and Flammable
2. Tapes of each thickness, Type/ Designation and Flammability shall be tested.
3. The Firm shall declare the varieties of pressure sensitive adhesive insulating tape intended to be covered in the Licence. The Scope of Licence may be restricted based on the manufacturing and testing capabilities of the manufacturer.
4. During the operation of the Licence, BO shall ensure that all the varieties covered in the Licence are tested in rotation to the extent possible
1. The following aspects of pressure sensitive adhesive insulating tape shall be taken into consideration for grouping of different varieties of tapes for the purpose of GoL/ CSoL: a. Declared thickness b. Type/ Designation c. Flammability- Flame retardant (FR) and Flammable
2. Tapes of each thickness, Type/ Designation and Flammability shall be tested.
3. The Firm shall declare the varieties of pressure sensitive adhesive insulating tape intended to be covered in the Licence. The Scope of Licence may be restricted based on the manufacturing and testing capabilities of the manufacturer.
4. During the operation of the Licence, BO shall ensure that all the varieties covered in the Licence are tested in rotation to the extent possible
Additional Information:
- Delivery Time: 30-40
View Complete details
Yes! I am Interested
Request a call back
BIS ISI Certification For Automotive vehicles pneumatic tyres IS 15636
Get Best Quote
Rs 49,000 / CertificatePrice on Request
Minimum Order Quantity: 1 Certificate
Product Brochure
Application Category Construction Type Structure Tyre Size Designation Speed Category Use of Tube Load Index (or Load Capacity) Ply Rating Carcass Material
Marking, Tyre Strength Test (Plunger Test), Load/Speed Performance Test, Tread Wear Indicators Note: During surveillance inspection, all possible tests shall be carried out in the factory. A Factory sample shall also be drawn for independent testing during surveillance inspection. No Market samples shall be drawn
Marking, Tyre Strength Test (Plunger Test), Load/Speed Performance Test, Tread Wear Indicators Note: During surveillance inspection, all possible tests shall be carried out in the factory. A Factory sample shall also be drawn for independent testing during surveillance inspection. No Market samples shall be drawn
Additional Information:
- Delivery Time: 30-40 days
View Complete details
Yes! I am Interested
Request a call back
BIS ISI for Pneumatic Tyres for Passenger Car Vehicles Diagonal and Radial Ply Is 15633
Get Best Quote
Rs 49,000 / CertificatePrice on Request
Minimum Order Quantity: 1 Certificate
Product Brochure
Grouping guidelines:- Each type of Tyre as per the approved Family of Tyre according to Clause 6.2.5.2 of IS 15633:2022 shall be tested for GoL/CSoL. If a Tubeless Tyre version is approved, Tube version for the same Tyre Designation may also be covered in the Scope of Licence based on the Manufacturing/Testing capabilities of the Manufacturer
Possible Tests in a Day 1. Marking, 2. Bead Unseating Resistance Test (for Tubeless Tyres), 3. Tyre Strength Test (Plunger Test), 4. Tread Wear Indicators
Note: However, during surveillance inspection (of 3 days), complete factory testing shall be carried out, for which visit charges for 2nd and 3rd day shall be realized from licensee as per the prevailing rate of special inspection charges. No factory sample shall be drawn during surveillance inspection. Two Market samples shall be drawn during an operative year for which testing charges shall be borne by BIS.
Possible Tests in a Day 1. Marking, 2. Bead Unseating Resistance Test (for Tubeless Tyres), 3. Tyre Strength Test (Plunger Test), 4. Tread Wear Indicators
Note: However, during surveillance inspection (of 3 days), complete factory testing shall be carried out, for which visit charges for 2nd and 3rd day shall be realized from licensee as per the prevailing rate of special inspection charges. No factory sample shall be drawn during surveillance inspection. Two Market samples shall be drawn during an operative year for which testing charges shall be borne by BIS.
Additional Information:
- Delivery Time: 40-50 Days
View Complete details
Yes! I am Interested
Request a call back
BIS ISI For Pneumatic Tyres for Two and Three Wheeled Motorcycles and Quadricycles Is 15627
Get Best Quote
Rs 49,000 / CertificatePrice on Request
Minimum Order Quantity: 1 Certificate
Product Brochure
PNEUMATIC TYRES FOR TWO AND THREE WHEELED MOTORCYCLES, QUADRICYCLES AND ERICKSHAW/E-CARTS
Grouping guidelines:- Each type of Tyre as per the approved Family of Tyres according to Clause 6.2.5.2 of IS 15627:2022 shall be tested for GoL/CSoL. If a Tubeless Tyre version is approved, Tube version for the same Tyre Designation may also be covered in the Scope of Licence based on the Manufacturing/Testing capabilities of the Manufacturer.
For MSME manufacturers, the requirement of maintaining a laboratory/in-house testing facility for routine tests (indicated as “R” in Column 2 of Table 1) is also optional. 2.2.1 MSME manufacturers may utilize common cluster based facilities as per guidelines for the utilization of cluster based test facilities by MSMEs or the provisions of Sharing of testing facilities or get testing done from BIS recognized/empaneled laboratory or any other laboratory having valid NABL accreditation as per IS/ISO/IEC 17025
Grouping guidelines:- Each type of Tyre as per the approved Family of Tyres according to Clause 6.2.5.2 of IS 15627:2022 shall be tested for GoL/CSoL. If a Tubeless Tyre version is approved, Tube version for the same Tyre Designation may also be covered in the Scope of Licence based on the Manufacturing/Testing capabilities of the Manufacturer.
For MSME manufacturers, the requirement of maintaining a laboratory/in-house testing facility for routine tests (indicated as “R” in Column 2 of Table 1) is also optional. 2.2.1 MSME manufacturers may utilize common cluster based facilities as per guidelines for the utilization of cluster based test facilities by MSMEs or the provisions of Sharing of testing facilities or get testing done from BIS recognized/empaneled laboratory or any other laboratory having valid NABL accreditation as per IS/ISO/IEC 17025
Additional Information:
- Delivery Time: 40-50 DAYS
View Complete details
Yes! I am Interested
Request a call back
BIS ISI Certification for Cycles- Retro-Reflective Devices Is 6742
Get Best Quote
Rs 49,000 / CertificatePrice on Request
Minimum Order Quantity: 1 Certificate
Product Brochure
Grouping Guidelines
1. For the purpose of GoL/CSoL, Retro-Reflective Devices as per IS/ISO 6742-2:2015 are categorized based on Product Type and Color as given below:
a) Reflector
Conventional Reflector
Front (White, Yellow, Red)
Side (White, Yellow, Red)
Rear (White, Yellow, Red)
Wide Angle Reflector
Front (White, Yellow, Red)
Side (White, Yellow, Red)
Rear (White, Yellow, Red)
Pedal Reflector (Yellow)
High Value Reflector (Red)
b) Retro-reflective Tyres (White, White/Yellow)
c) Retro-reflective Spokes (White) d) Retro-reflective Spoke Cases (White)
2. a) Samples of each product type (Reflector, Retro-reflective Tyres, Retro-reflective Spokes, Retro-reflective Spoke Cases) shall be tested to cover that particular variety of Retro-Reflective Device.
b) For Reflector, samples of Conventional Reflector/ Wide Angle Reflector/ Pedal Reflector/ High Value Reflector shall be tested separately.
c) For Conventional Reflector/ Wide Angle Reflector, samples of each color for any location (Front, Side, Rear) shall be tested separately to cover that particular color for all locations.
d) For Retro-reflective Tyres, samples of each color (White, White/Yellow) shall be tested separately.
3. The Firm shall declare the varieties of Retro-Reflective Devices intended to be covered in the Licence. The Scope of Licence may be restricted based on the Manufacturing and Testing capabilities of the Manufacturer.
4. During the operation of the Licence, BO shall ensure that all the varieties covered in the Licence are tested in rotation, to the extent possible.
Note: In India, Photometric requirements as per Group A only are applicable. Hence, samples shall be tested accordingly and licence shall be granted for Group A only.
1. For the purpose of GoL/CSoL, Retro-Reflective Devices as per IS/ISO 6742-2:2015 are categorized based on Product Type and Color as given below:
a) Reflector
Conventional Reflector
Front (White, Yellow, Red)
Side (White, Yellow, Red)
Rear (White, Yellow, Red)
Wide Angle Reflector
Front (White, Yellow, Red)
Side (White, Yellow, Red)
Rear (White, Yellow, Red)
Pedal Reflector (Yellow)
High Value Reflector (Red)
b) Retro-reflective Tyres (White, White/Yellow)
c) Retro-reflective Spokes (White) d) Retro-reflective Spoke Cases (White)
2. a) Samples of each product type (Reflector, Retro-reflective Tyres, Retro-reflective Spokes, Retro-reflective Spoke Cases) shall be tested to cover that particular variety of Retro-Reflective Device.
b) For Reflector, samples of Conventional Reflector/ Wide Angle Reflector/ Pedal Reflector/ High Value Reflector shall be tested separately.
c) For Conventional Reflector/ Wide Angle Reflector, samples of each color for any location (Front, Side, Rear) shall be tested separately to cover that particular color for all locations.
d) For Retro-reflective Tyres, samples of each color (White, White/Yellow) shall be tested separately.
3. The Firm shall declare the varieties of Retro-Reflective Devices intended to be covered in the Licence. The Scope of Licence may be restricted based on the Manufacturing and Testing capabilities of the Manufacturer.
4. During the operation of the Licence, BO shall ensure that all the varieties covered in the Licence are tested in rotation, to the extent possible.
Note: In India, Photometric requirements as per Group A only are applicable. Hence, samples shall be tested accordingly and licence shall be granted for Group A only.
Additional Information:
- Delivery Time: 40-50 DAYS
View Complete details
Yes! I am Interested
Request a call back
BIS ISI Certification for Sewing Machine Is 1610CERTIFICATION for Transparent Float Glass Is 14900
Get Best Quote
Rs 49,000 / CertificatePrice on Request
Minimum Order Quantity: 1 Certificate
Product Brochure
GROUPING GUIDELINES
The following grouping guidelines shall be followed for Grant of Licence/Change in scope of licence for Transparent Float Glass as per IS 14900:2018:
i) For covering all thicknesses in a range within the scope of licence, a sample of the highest and lowest thicknesses may be drawn for testing.
ii) Licence may be granted or change in scope may be allowed for covering all the thicknesses within the range if the samples are found passing in testing.
iii) However, it shall be ensured that the firm is having all the necessary manufacturing and testing facilities for the manufacture and testing of the varieties to be included in the licence.
iv) For covering optional requirement (bloom) in the scope, sample shall be tested for this requirement as well.
v) During the operation of the licence, samples of all varieties shall be drawn by rotation.
The following grouping guidelines shall be followed for Grant of Licence/Change in scope of licence for Transparent Float Glass as per IS 14900:2018:
i) For covering all thicknesses in a range within the scope of licence, a sample of the highest and lowest thicknesses may be drawn for testing.
ii) Licence may be granted or change in scope may be allowed for covering all the thicknesses within the range if the samples are found passing in testing.
iii) However, it shall be ensured that the firm is having all the necessary manufacturing and testing facilities for the manufacture and testing of the varieties to be included in the licence.
iv) For covering optional requirement (bloom) in the scope, sample shall be tested for this requirement as well.
v) During the operation of the licence, samples of all varieties shall be drawn by rotation.
Additional Information:
- Delivery Time: 40-50
View Complete details
Yes! I am Interested
Request a call back
BIS ISI Certification for Cycle- Rubber Tubes (Moulded/ Jointed) Is 2415
Get Best Quote
Rs 49,000 / CertificatePrice on Request
Minimum Order Quantity: 1 Certificate
Product Brochure
Grouping Guidelines
1. The parameters as given below shall be considered for grouping of Cycle Rubber Tubes as per IS 2415:2015 for GOL/Inclusion: Class of Tubes- Class A or Class B or Class C or Class D
2. The Firm shall declare the Class of various tubes they intend to cover in the Licence.
3. Tubes with different sizes shall be considered as one group, provided the Class remains the same. Any one Size from each Class shall be tested for covering all the sizes of tubes in that group.
4. The Scope of Licence may be restricted based on the Manufacturing and Testing capabilities of the Manufacturer. 5. During the operation of the Licence, BO shall ensure that all the types and sizes covered in the Licence are tested in rotation, to the extent possible.
1. The parameters as given below shall be considered for grouping of Cycle Rubber Tubes as per IS 2415:2015 for GOL/Inclusion: Class of Tubes- Class A or Class B or Class C or Class D
2. The Firm shall declare the Class of various tubes they intend to cover in the Licence.
3. Tubes with different sizes shall be considered as one group, provided the Class remains the same. Any one Size from each Class shall be tested for covering all the sizes of tubes in that group.
4. The Scope of Licence may be restricted based on the Manufacturing and Testing capabilities of the Manufacturer. 5. During the operation of the Licence, BO shall ensure that all the types and sizes covered in the Licence are tested in rotation, to the extent possible.
Additional Information:
- Delivery Time: 35-45 Days
View Complete details
Yes! I am Interested
Request a call back
BIS ISI Certification for Sewing Machine Is 1610
Get Best Quote
Rs 49,000 / CertificatePrice on Request
Minimum Order Quantity: 1 Certificate
Product Brochure
Grouping guidelines
Sewing Machine with each mode of driving arrangement (Hand operated/ Foot operated/ Motor-driven) shall be tested separately for GoL/CSoL
Type- Hand operated/Foot operated/Motor-driven
Sewing Machine with each mode of driving arrangement (Hand operated/ Foot operated/ Motor-driven) shall be tested separately for GoL/CSoL
Type- Hand operated/Foot operated/Motor-driven
Additional Information:
- Delivery Time: 30-40 Days
View Complete details
Yes! I am Interested
Request a call back
BIS ISI Certification for Medical Electrical Equipment- Diagnostic X-Ray Machine Is 7620 Part 1 & 2
Get Best Quote
Rs 49,000 / CertificatePrice on Request
Minimum Order Quantity: 1 Certificate
Product Brochure
As the licence is operated on Factory Testing basis, complete testing of a sample shall be done in factory. (two mandays are required for complete testing of product as per IS 7620 (Part 2) : 1986 and three mandays are required for complete testing of product as per IS 7620 (Part 1) : 1986)
Licence is granted to use Standard Mark as per IS 7620 (Part 2): 1986 with the following scope: “Stationary/Mobile Medical electrical equipment- Diagnostic X-ray machine type, frequency generator, for rated line voltage V, frequency Hz, phase, current A, Rated Peak Output Voltage kVp, output power W, Class of Timer ” Other relevant aspects may also be mentioned in the scope
NOTE 1 - IS 7620 (Part 1) : 1986 covers the General and Safety requirement of the product ‘Diagnostic Xray machine’, whereas the IS 7620 (Part 2) : 1986 covers the performance requirement of the product. Further, the IS 7620 (Part 1) : 1986 is mandatory under the AERB’s QCO dated October 1994.
NOTE 2 - Grant of licence as per IS 7620 (Part 2) : 1986 to be considered only when the applicant is already having an operative licence as per IS 7620 (Part 1) : 1986 or has applied for grant of licence as per IS 7620 (Part 1) : 1986 as well. In such a scenario, the compliance to both the Indian Standards IS 7620 (Part1 ): 1986 and IS 7620 (Part 2) : 1986 to be established for considering grant of licence.
NOTE 3 – Licence as per IS 7620 (Part 2) : 1986 to be granted only when compliance to the requirements of both IS 7620 (Part 1) : 1986 and IS 7620 (Part 2) : 1986 is established
Licence is granted to use Standard Mark as per IS 7620 (Part 2): 1986 with the following scope: “Stationary/Mobile Medical electrical equipment- Diagnostic X-ray machine type, frequency generator, for rated line voltage V, frequency Hz, phase, current A, Rated Peak Output Voltage kVp, output power W, Class of Timer ” Other relevant aspects may also be mentioned in the scope
NOTE 1 - IS 7620 (Part 1) : 1986 covers the General and Safety requirement of the product ‘Diagnostic Xray machine’, whereas the IS 7620 (Part 2) : 1986 covers the performance requirement of the product. Further, the IS 7620 (Part 1) : 1986 is mandatory under the AERB’s QCO dated October 1994.
NOTE 2 - Grant of licence as per IS 7620 (Part 2) : 1986 to be considered only when the applicant is already having an operative licence as per IS 7620 (Part 1) : 1986 or has applied for grant of licence as per IS 7620 (Part 1) : 1986 as well. In such a scenario, the compliance to both the Indian Standards IS 7620 (Part1 ): 1986 and IS 7620 (Part 2) : 1986 to be established for considering grant of licence.
NOTE 3 – Licence as per IS 7620 (Part 2) : 1986 to be granted only when compliance to the requirements of both IS 7620 (Part 1) : 1986 and IS 7620 (Part 2) : 1986 is established
Additional Information:
- Delivery Time: 40-50 DAYS
View Complete details
Yes! I am Interested
Request a call back
BIS ISI Certification for Clinical Thermometers Is 3055 Part-1 and Part-2
Get Best Quote
Rs 39,000 / CertificatePrice on Request
Minimum Order Quantity: 1 Certificate
Product Brochure
Name of the product Clinical Thermometers
Type- Solid stem, Mercury-in-glass, Oral/ Rectal type
Type- Solid stem, Mercury-in-glass, Oral/ Rectal type
Additional Information:
- Delivery Time: 30-40 Days
View Complete details
Yes! I am Interested
Request a call back
BIS ISI Certification for Drywall Screw IS 18507
Get Best Quote
Rs 59,000 / CertificatePrice on Request
Minimum Order Quantity: 1 Certificate
Product Brochure
SCOPE
This standard specifies the characteristics of cross recessed bugle head/trumpet head drywall screws for thread diameter from 3.5 mm to 5.5 mm.
DESIGNATION
The drywall screws shall be designated with the IS No. of this standard, the nominal outside thread diameter d1, the nominal length L and the material (grade of steel/SS or brass). Designation of a drywall screw with a nominal outside thread diameter of 4.2 mm, nominal length 60 mm and made up of stainless steel (Grade A4) shall be designated as: Drywall screw: IS 18507 — 4.2 × 60 — SS(A4)
This standard specifies the characteristics of cross recessed bugle head/trumpet head drywall screws for thread diameter from 3.5 mm to 5.5 mm.
DESIGNATION
The drywall screws shall be designated with the IS No. of this standard, the nominal outside thread diameter d1, the nominal length L and the material (grade of steel/SS or brass). Designation of a drywall screw with a nominal outside thread diameter of 4.2 mm, nominal length 60 mm and made up of stainless steel (Grade A4) shall be designated as: Drywall screw: IS 18507 — 4.2 × 60 — SS(A4)
Additional Information:
- Delivery Time: 40-50 Days
View Complete details
Yes! I am Interested
Request a call back
BIS ISI Certification for Chipboard Screws Is 18508
Get Best Quote
Rs 59,000 / CertificatePrice on Request
Minimum Order Quantity: 1 Certificate
Product Brochure
SCOPE
This standard specifies the characteristics of cross recessed chipboard screws for threaded diameter from 3 mm to 6 mm.
DESIGNATION
The drywall screws shall be designated with the IS No. of this standard, the screw thread diameter D, the nominal length L, material (Grade of steel/SS or Brass) and the type of cross-slot. Example: Designation of a chipboard screw with screw thread diameter of 4.5 mm, and a nominal length of 60 mm, made up of stainless steel (Grade A2) and with type H cross recess shall be designated: Chipboard screw: IS 18508 — 4.5 × 60 — SS(A2) — H
This standard specifies the characteristics of cross recessed chipboard screws for threaded diameter from 3 mm to 6 mm.
DESIGNATION
The drywall screws shall be designated with the IS No. of this standard, the screw thread diameter D, the nominal length L, material (Grade of steel/SS or Brass) and the type of cross-slot. Example: Designation of a chipboard screw with screw thread diameter of 4.5 mm, and a nominal length of 60 mm, made up of stainless steel (Grade A2) and with type H cross recess shall be designated: Chipboard screw: IS 18508 — 4.5 × 60 — SS(A2) — H
Additional Information:
- Delivery Time: 40-50
View Complete details
Yes! I am Interested
Request a call back
BIS ISI Certification for Vacuum Cleaners Is 302 Part 1
Get Best Quote
Rs 49,000 / CertificatePrice on Request
Minimum Order Quantity: 1 Certificate
Product Brochure
Raw Material and Components used in the product shall be tested as per relevant Indian Standard, wherever applicable. In case, the raw material / component is notified under mandatory BIS certification, the raw material/ component shall bear the BIS Standard Mark under a valid licence. E.g. Plugs: as per IS 1293, Cables: as per IS 694/ IS 9968 (Part 1), Switches as per IS 3854, etc
Additional Information:
- Delivery Time: 30-45
View Complete details
Yes! I am Interested
Request a call back
BIS ISI Certification for Electric Cell Bells Is 302-Part 1
Get Best Quote
Rs 39,000 / CertificatePrice on Request
Minimum Order Quantity: 1 Certificate
Product Brochure
1) Manufacturer shall declare the model(s) of each type(s) of electrical appliance(s) manufactured by them and declare the following parameters of each model : a) Description of the Appliance; b) Rated voltage; c) Rated Wattage; d) Rated input power; e) Class of appliance; f) Insulation class; g) Degree of protection (IP); h) Other product specific requirement, i.e. volume, capacity. Etc.:
| BIS Certification for Safety of Indoor Electric Call Bells & Buzzers for Household Appliances. |
Additional Information:
- Delivery Time: 30-40 Days
View Complete details
Yes! I am Interested
Request a call back
BIS ISI Certification for Electric Fence Energizers Is 302-Part 1
Get Best Quote
Rs 49,000 / CertificatePrice on Request
Minimum Order Quantity: 1 Certificate
Product Brochure
1) Manufacturer shall declare the model(s) of each type(s) of electrical appliance(s) manufactured by them and declare the following parameters of each model :
a) Description of the Appliance;
b) Rated voltage;
c) Rated Wattage;
d) Rated input power;
e) Class of appliance;
f) Insulation class;
g) Degree of protection (IP);
h) Other product specific requirement, i.e. volume, capacity. Etc.:
a) Description of the Appliance;
b) Rated voltage;
c) Rated Wattage;
d) Rated input power;
e) Class of appliance;
f) Insulation class;
g) Degree of protection (IP);
h) Other product specific requirement, i.e. volume, capacity. Etc.:
| ISI Mark Certification for Electric Fence Energizers |
Additional Information:
- Delivery Time: 40-50 DAYS
View Complete details
Yes! I am Interested
Request a call back
BIS ISI Certification for Elecrtic Steam Cooker Is 302 Part 1
Get Best Quote
Rs 49,000 / CertificatePrice on Request
Minimum Order Quantity: 1 Certificate
Product Brochure
1) Manufacturer shall declare the model(s) of each type(s) of electrical appliance(s) manufactured by them and declare the following parameters of each model :
a) Description of the Appliance;
b) Rated voltage;
c) Rated Wattage;
d) Rated input power;
e) Class of appliance;
f) Insulation class; g) Degree of protection (IP);
h) Other product specific requirement,
i.e. volume, capacity. Etc.
a) Description of the Appliance;
b) Rated voltage;
c) Rated Wattage;
d) Rated input power;
e) Class of appliance;
f) Insulation class; g) Degree of protection (IP);
h) Other product specific requirement,
i.e. volume, capacity. Etc.
Additional Information:
- Delivery Time: 40-50 Days
View Complete details
Yes! I am Interested
Request a call back
BIS ISI Certification for Cooking Ranges,Hobs,O
Get Best Quote
Rs 49,000 / CertificatePrice on Request
Minimum Order Quantity: 1 Certificate
Product Brochure
Manufacturer shall declare the model(s) of each type(s) of electrical appliance(s) manufactured by them and declare the following parameters of each model :
a) Description of the Appliance;
b) Rated voltage;
c) Rated Wattage;
d) Rated input power;
e) Class of appliance;
f) Insulation class;
g) Degree of protection (IP);
h) Other product specific requirement,
i.e. volume, capacity. Etc.
a) Description of the Appliance;
b) Rated voltage;
c) Rated Wattage;
d) Rated input power;
e) Class of appliance;
f) Insulation class;
g) Degree of protection (IP);
h) Other product specific requirement,
i.e. volume, capacity. Etc.
Additional Information:
- Delivery Time: 40-45 Days
View Complete details
Yes! I am Interested
Request a call back
BIS ISI Certification for Cross Recessed Countersunk Head Wood Screws IS 18509
Get Best Quote
Rs 59,000 / CertificatePrice on Request
Minimum Order Quantity: 1 Certificate
Product Brochure
SCOPE
This standard specifies the characteristics of cross recessed countersunk head wood screws for thread diameter from 2 mm to 8 mm.
DESIGNATION
Cross recessed countersunk head wood screws shall be designated by the name, IS number of this standard, thread size, length l (Nominal size), material (Grade of steel/SS or Brass), and type of cross slot. Example: A cross recessed countersunk head wood screw with thread size 4 mm, length 20 mm, made up of steel and with type H cross recess shall be designated as: Wood screw: IS 18509 – 4 × 20 — Steel(7M) – H
This standard specifies the characteristics of cross recessed countersunk head wood screws for thread diameter from 2 mm to 8 mm.
DESIGNATION
Cross recessed countersunk head wood screws shall be designated by the name, IS number of this standard, thread size, length l (Nominal size), material (Grade of steel/SS or Brass), and type of cross slot. Example: A cross recessed countersunk head wood screw with thread size 4 mm, length 20 mm, made up of steel and with type H cross recess shall be designated as: Wood screw: IS 18509 – 4 × 20 — Steel(7M) – H
Additional Information:
- Delivery Time: 40-50 Days
View Complete details
Yes! I am Interested
Request a call back
BIS ISI Certification for Electric Water Boilers Is 302 Part 1
Get Best Quote
Rs 49,000 / CertificatePrice on Request
Minimum Order Quantity: 1 Certificate
Product Brochure
1) Manufacturer shall declare the model(s) of each type(s) of electrical appliance(s) manufactured by them and declare the following parameters of each model : a) Description of the Appliance; b) Rated voltage; c) Rated Wattage; d) Rated input power; e) Class of appliance; f) Insulation class; g) Degree of protection (IP); h) Other product specific requirement, i.e. volume, capacity. Etc.:
| ISI Mark Certifications for Electric Water Boilers |
| BIS Certification for Safety of household and similar electrical appliances - Electric water boilers |
Additional Information:
- Delivery Time: 30-40 Days
View Complete details
Yes! I am Interested
Request a call back
BIS ISI Certification for Electric Coffee Maker Is 302-Part 1
Get Best Quote
Rs 49,000 / CertificatePrice on Request
Minimum Order Quantity: 1 Certificate
Product Brochure
1) Manufacturer shall declare the model(s) of each type(s) of electrical appliance(s) manufactured by them and declare the following parameters of each model : a) Description of the Appliance; b) Rated voltage; c) Rated Wattage; d) Rated input power; e) Class of appliance; f) Insulation class; g) Degree of protection (IP); h) Other product specific requirement, i.e. volume, capacity. Etc.:
| BIS Certification for Safety of household & similar electrical appliances - Electric coffee machines |
Additional Information:
- Delivery Time: 30-40 Days
View Complete details
Yes! I am Interested
Request a call back
BIS ISI Certification for Electric Bean Slicers Is
Get Best Quote
Rs 49,000 / CertificatePrice on Request
Minimum Order Quantity: 1 Certificate
Product Brochure
1) Manufacturer shall declare the model(s) of each type(s) of electrical appliance(s) manufactured by them and declare the following parameters of each model : a) Description of the Appliance; b) Rated voltage; c) Rated Wattage; d) Rated input power; e) Class of appliance; f) Insulation class; g) Degree of protection (IP); h) Other product specific requirement, i.e. volume, capacity. Etc.
Additional Information:
- Delivery Time: 30-40 DAYS
View Complete details
Yes! I am Interested
Request a call back
BIS ISI Certification for Electric Berry Juice Extractors Is 302 -Part 1
Get Best Quote
Rs 39,000 / CertificatePrice on Request
Minimum Order Quantity: 1 Certificate
Product Brochure
1) Manufacturer shall declare the model(s) of each type(s) of electrical appliance(s) manufactured by them and declare the following parameters of each model : a) Description of the Appliance; b) Rated voltage; c) Rated Wattage; d) Rated input power; e) Class of appliance; f) Insulation class; g) Degree of protection (IP); h) Other product specific requirement, i.e. volume, capacity. Etc.
Additional Information:
- Delivery Time: 30-40 DAYS
View Complete details
Yes! I am Interested
Request a call back
ISI Mark Certification for Wrought Aluminium & Aluminium alloy Bar,Rods, tubes, sheets plates
Get Best Quote
Rs 49,000 / CertificatePrice on Request
Product Brochure
GROUPING GUIDELINES
1) IS 5082:1998 is applicable to
a) extruded bars and rods above 6mm diameter; extruded angles, channels, other sections and profiles including tubes, hollow sections of thickness, 3 mm and above thickness.
b) rolled-plates, sheets of 3 mm and above thickness.
2) Further, IS 5082:1988 specifies two Alloy Designations (19501 and 63401) and five Temper designations (M, H1, H2, WP range 1 and WP range.
3) Wrought Aluminum and Aluminum Alloys as per IS 5082 have been grouped based upon their form as follows
4) For the Purpose of GoL, CSoL, the following grouping guidelines shall be considered:- a) Sample of each alloy designation for each temper shall be drawn and tested from each group. b) The sample drawn above shall also include sample(s) of:- i) For Group 1- Lowest and Highest Outside/Inside Diameter/Width Across Flats of Extruded Round Tubes and Hollow Sections ii) For Group 2& 3 – Any size of plate and sheet iii) For Group
4- Lowest and Highest Outside/Inside Diameter of Drawn Round Tube iv) For Group 5 –For regular sections (including bars), lowest and highest nominal size. Separate sample for each irregular section/complicated shape shall be drawn.
5) While considering Grant of license/inclusion of additional varieties, it shall be ensured that the applicant/licensee has got the complete manufacturing and testing facilities for all the sizes and grades, for grant
1) IS 5082:1998 is applicable to
a) extruded bars and rods above 6mm diameter; extruded angles, channels, other sections and profiles including tubes, hollow sections of thickness, 3 mm and above thickness.
b) rolled-plates, sheets of 3 mm and above thickness.
2) Further, IS 5082:1988 specifies two Alloy Designations (19501 and 63401) and five Temper designations (M, H1, H2, WP range 1 and WP range.
3) Wrought Aluminum and Aluminum Alloys as per IS 5082 have been grouped based upon their form as follows
4) For the Purpose of GoL, CSoL, the following grouping guidelines shall be considered:- a) Sample of each alloy designation for each temper shall be drawn and tested from each group. b) The sample drawn above shall also include sample(s) of:- i) For Group 1- Lowest and Highest Outside/Inside Diameter/Width Across Flats of Extruded Round Tubes and Hollow Sections ii) For Group 2& 3 – Any size of plate and sheet iii) For Group
4- Lowest and Highest Outside/Inside Diameter of Drawn Round Tube iv) For Group 5 –For regular sections (including bars), lowest and highest nominal size. Separate sample for each irregular section/complicated shape shall be drawn.
5) While considering Grant of license/inclusion of additional varieties, it shall be ensured that the applicant/licensee has got the complete manufacturing and testing facilities for all the sizes and grades, for grant
View Complete details
Yes! I am Interested
Request a call back
BIS ISI Certification for Hand Head Electric Engraving Tools
Get Best Quote
Rs 39,000 / CertificatePrice on Request
Product Brochure
The scope of IS 302 : Part 1 : 2024 is the safety of household and similar electrical appliances. The standard applies to a wide range of electrical appliances, including:Bulk tea or coffee brewing machinesCigarette vending machinesCoffee grindersCommercial liquid heatersCoffee makersHot and cold beverage vending machinesHot water dispensersIce cream and whipped cream dispensersIce dispensersNewspaper, audio or video tape or disc vending machines The standard does not apply to appliances intended for industrial use, exclusive household use, or use in locations with special conditions.
View Complete details
Yes! I am Interested
Request a call back
BIS ISI Certification for Thermal Storage Room Heaters
Get Best Quote
Rs 39,000 / CertificatePrice on Request
Product Brochure
This standard deals with the safety of electrical appliances for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances and 415 V for other appliances.
Appliances not intended for normal household use but which nevertheless may be a source of danger to the public, such as appliances intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard.
NOTE — Examples of such appliances axe catering equipment, cleaning appliances for industrial and commercial use, and appliances for hairdressers.
As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered by all persons in and around the home. However, in general, it does not take into account:
a) the use of appliances by young children or infirm persons without supervision; and
b) playing with the appliance by young children.
Appliances not intended for normal household use but which nevertheless may be a source of danger to the public, such as appliances intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard.
NOTE — Examples of such appliances axe catering equipment, cleaning appliances for industrial and commercial use, and appliances for hairdressers.
As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered by all persons in and around the home. However, in general, it does not take into account:
a) the use of appliances by young children or infirm persons without supervision; and
b) playing with the appliance by young children.
View Complete details
Yes! I am Interested
Request a call back
BIS ISI Certification for Foot Warmers and Heating Mats
Get Best Quote
Rs 39,000 / CertificatePrice on Request
Product Brochure
This standard deals with the safety of electrical appliances for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances and 415 V for other appliances.
Appliances not intended for normal household use but which nevertheless may be a source of danger to the public, such as appliances intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard.
NOTE — Examples of such appliances axe catering equipment, cleaning appliances for industrial and commercial use, and appliances for hairdressers.
As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered by all persons in and around the home. However, in general, it does not take into account:
a) the use of appliances by young children or infirm persons without supervision; and
b) playing with the appliance by young children.:
Appliances not intended for normal household use but which nevertheless may be a source of danger to the public, such as appliances intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard.
NOTE — Examples of such appliances axe catering equipment, cleaning appliances for industrial and commercial use, and appliances for hairdressers.
As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered by all persons in and around the home. However, in general, it does not take into account:
a) the use of appliances by young children or infirm persons without supervision; and
b) playing with the appliance by young children.:
| ISI Mark Certification for Foot Warmers and Heating Mats |
View Complete details
Yes! I am Interested
Request a call back
BIS ISI Certification for Wrought Aluminium & Alloy Wire for Genral Engineering Is 739
Get Best Quote
Rs 49,000 / CertificatePrice on Request
Minimum Order Quantity: 1 Certificate
Product Brochure
GROUPING GUIDELINES
1) Designations have been grouped based upon their aluminum purity/major alloying element content. For the purpose of GoL/CSoL, the following grouping guidelines may be considered
2) The sample(s) drawn above shall be of the smallest wire diameter in case of round wires and the smallest width/width across flats in case of Shaped wires (Square/Rectangular/Octagonal/Hexagonal) . Further, sample of each Condition(Temper) (cl.6.1) is required to be drawn to cover the Conditions (Tempers) intended to be covered in the licence.
3) However, it shall be ensured that the firm is having all the necessary manufacturing and testing facilities for manufacturing/testing of all the designations/conditions/sizes and shapes covered in the scope of the licence.
5) During the operation of the licence, BOs shall ensure that all designations/conditions/sizes and shapes covered in the scope of the licence are drawn for independent testing in rotation over a period of time.
1) Designations have been grouped based upon their aluminum purity/major alloying element content. For the purpose of GoL/CSoL, the following grouping guidelines may be considered
2) The sample(s) drawn above shall be of the smallest wire diameter in case of round wires and the smallest width/width across flats in case of Shaped wires (Square/Rectangular/Octagonal/Hexagonal) . Further, sample of each Condition(Temper) (cl.6.1) is required to be drawn to cover the Conditions (Tempers) intended to be covered in the licence.
3) However, it shall be ensured that the firm is having all the necessary manufacturing and testing facilities for manufacturing/testing of all the designations/conditions/sizes and shapes covered in the scope of the licence.
5) During the operation of the licence, BOs shall ensure that all designations/conditions/sizes and shapes covered in the scope of the licence are drawn for independent testing in rotation over a period of time.
Additional Information:
- Delivery Time: 30-40 DAYS
View Complete details
Yes! I am Interested
Request a call back
BIS ISI Certification for Wrought Aluminium Wire for Electrical Purpose Is 2067
Get Best Quote
Rs 59,000 / CertificatePrice on Request
Minimum Order Quantity: 1 Certificate
Product Brochure
GROUPING GUIDELINES
The following grouping guidelines shall apply for Grant of Licence (GoL)/Change in Scope of Licence (CSoL):
Samples of each condition (O/H3/H4) and the smallest size (diameter) of the range of sizes intended to be covered in the scope of licence, shall be tested. Scope of licence shall be restricted based on the
manufacturing and testing facilities available During the operation of licence, samples of each variety covered in the scope of licence, shall be tested, to the extent possible
The following grouping guidelines shall apply for Grant of Licence (GoL)/Change in Scope of Licence (CSoL):
Samples of each condition (O/H3/H4) and the smallest size (diameter) of the range of sizes intended to be covered in the scope of licence, shall be tested. Scope of licence shall be restricted based on the
manufacturing and testing facilities available During the operation of licence, samples of each variety covered in the scope of licence, shall be tested, to the extent possible
Additional Information:
- Delivery Time: 40-50 Days
View Complete details
Yes! I am Interested
Request a call back
BIS ISI Certifiaction Commercial Electric Rinsing Sinks
Get Best Quote
Rs 39,000 / CertificatePrice on Request
Product Brochure
This standard deals with the safety of electrical appliances for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances and 415 V for other appliances.
Appliances not intended for normal household use but which nevertheless may be a source of danger to the public, such as appliances intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard.
NOTE — Examples of such appliances axe catering equipment, cleaning appliances for industrial and commercial use, and appliances for hairdressers.
As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered by all persons in and around the home. However, in general, it does not take into account:
a) the use of appliances by young children or infirm persons without supervision; and
b) playing with the appliance by young children.
Appliances not intended for normal household use but which nevertheless may be a source of danger to the public, such as appliances intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard.
NOTE — Examples of such appliances axe catering equipment, cleaning appliances for industrial and commercial use, and appliances for hairdressers.
As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered by all persons in and around the home. However, in general, it does not take into account:
a) the use of appliances by young children or infirm persons without supervision; and
b) playing with the appliance by young children.
View Complete details
Yes! I am Interested
Request a call back
BIS ISI Certification for Commercial Vacuum Packaging Appliances
Get Best Quote
Rs 49,000 / CertificatePrice on Request
Product Brochure
Raw Material and Components used in the product shall be tested as per relevant Indian Standard, wherever applicable. In case, the raw material / component is notified under mandatory BIS certification, the raw material/ component shall bear the BIS Standard Mark under a valid licence. E.g. Plugs: as per IS 1293, Cables: as per IS 694/ IS 9968 (Part 1), Switches as per IS 3854, etc:
| ISI Mark Certification for Commercial Vacuum Packaging Appliances |
View Complete details
Yes! I am Interested
Request a call back
BIS ISI Certification for Beauty Care Appliances Incorporating Lasers and Intense Light Sources
Get Best Quote
Rs 39,000 / CertificatePrice on Request
Product Brochure
The scope of IS 302: Part 1: 2024 is the safety of household and similar electrical appliances. The standard applies to a wide range of electrical appliances, including: coffee makers, hot water dispensers, ice dispensers, vending machines, and refrigerated merchandisers. The standard does not apply to appliances used for industrial purposes, commercial electric boiling pans, amusement machines, or display cabinets. The standard requires that all appliances must:Conform to the Indian Standard IS 302 (Part 1): 2008Bear the Standard MarkHave a license from the Bureau of Indian Standards The Bureau of Indian Standards is the certifying and enforcing authority for compliance with the standard.:
| ISI Mark Certification for Beauty Care Appliances Incorporating Lasers and Intense Light Sources |
View Complete details
Yes! I am Interested
Request a call back
View More
EXPLORE MORE CATEGORIES